The SSIF driver implements the BMC side of SSIF interface for the Aspeed AST25xx BMC. It registers an I2C slave with address which is defined in the ssif-bmc node in device tree. It also creates a device interface in user space and supports system calls to handle IPMI request and response messages. Device driver: Requests the device be put in D0 (see scenario 2) and sets any proprietary registers in the chip required to handle the wake-up event. Call to action on PCI power management and device drivers. Integrate ACPI and PCI-PM capabilities into your devices as described in this article. Arduino is an open-source electronics platform based on easy-to-use hardware and software. NuMicro NuMaker UNO Development Board is an Arduino compatible hardware using NuMicro MCU as the micro controller. Its function can be extended with Arduino add-ons. Users can use Arduino IDE to develop their applications and leverage large number of open source samples. Installs the infrared driver for Intel® NUCs with Nuvoton Consumer Infrared. (CIR). The infrared driver is required if you plan to use infrared remote control devices. Not sure which driver is right for your Intel NUC? Run Intel® Driver & Support Assistant to automatically detect updates.
This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.
Original product version: Windows 10, version 1703
Original KB number: 4021854
Symptom
When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.
Cause
This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.
Drivers Nuvoton Input Devices Download
This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.
Resolution
To fix this issue, use one of the following methods.
USB Driver for Orion™ Star A200 and A300 meters Download (zip file) Star A200 and Star A300 series meter software rev 3.04 (Chinese, English, French, German, Italian, and Spanish User Interface) and instructions – 32-bit version.
Drivers Nuvoton Input Devices Input
Method 1
To resolve this issue, install update 4022716.
Method 2
If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.
Method 3
If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.
Note
See the device manufacturer's user guide for specific instructions about how to install the driver.
Method 4
If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:
- Install the device-specific driver (see Method 2).
- Open Device Manager.
- Right-click (or tap and hold) the name of the device, and then select Uninstall.
- Restart the computer.
When it restarts, Windows will try to reinstall the device by using the device-specific driver.