μManager™ is a trademark of The Regents of the University of California. Used with Permission.

1. Download Olympus Port Devices Driver Windows 10
2. Download Olympus Port Devices Driver Download
3. Download Olympus Port Devices Driver
4. Download Olympus Port Devices Drivers

Micro-Manager versions

Download Olympus Port Devices Driver Windows 10

Vanta handheld portable XRF analyzers provide fast elemental analysis and alloy identification in the field and are rugged to maximize uptime. Olympus Image Share. Easily transfer image and video files from Wi-Fi-enabled Olympus cameras to your phone or tablet. Apply Art Filters, geotag photos and even wirelessly operate your camera. Learn More & Download. Add an Olympus Hub device to your hardware configuration and choose its serial port. Other devices (stage, filter wheel, etc) then communicate to the hardware through the (software) Hub. Device Configuration. There are two modes of Control: Computer and 'Manual + Computer'. The former is faster, but disables the manual controls.

Currently, there are 2 usable versions of Micro-Manager: 1.4 and 2.0-gamma. These versions use the same code to interface to devices, but differ in their user interface, and file reading/saving code. 2.0-gamma is actively developed and maintained. 1.4 is no longer developed (except for the device support and the ASI diSPIM plugin). If you start using Micro-Manager, it is recommended to use the latest nightly build of 2.0-gamma.

Windows device driver information for OLYMPUS Digital Camera. These are drivers for a OLYMPUS Digital Camera. Manufactured by Olympus Corporation, the OLYMPUS Digital Camera is incorporated with a 37mm lens with a focus of 0.5m to infinity range. The camera is also has a optical view finder that is a bright and large with an auto focus target. Olympus products are built to highest quality standards and should provide you with years of satisfaction. Ensure the long lasting enjoyment of your purchase with an Extended Warranty for the Olympus OM-D Body only.

Nightly Builds

Although there has been no official release for quite some time, further development and multiple bug fixes have occurred in the 1.4 branch in parallel with development of 2.0. Nightly builds are almost always stable and a better choice for most users than the latest official release.

• Version 2.0-gamma (Windows) (you most likely want the 64-bit version)
• Version 1.4 (Windows) (pay attention to 32-bit or 64-bit, both are listed but you need the one matching your Windows OS)

Micro-Manager 1.4.22 (August 14, 2015)

Read the Known Issues.

• Windows 32-bit, 63.4 MB
  
• Windows 64-bit, 65.1 MB
  

Requires Windows XP, or 7-10. Windows 7 recommended. Device drivers may have other requirements.

• Mac OS X (Universal Binary), 54.0 MB
  

Requires Mac OS X 10.5-10.10. 10.11 (El Capitan) is not yet supported. Device drivers may have other requirements.
(OS X 10.8 and later: if the application does not open when double-clicked for the first time, try ctrl-click or right click, then select 'Open'.)

• Under GNU/Linux platforms, you should compile micro-manager from source.

Download Olympus Port Devices Driver Download

Known issues in 1.4.22

• If you use AndorSDK3 (Andor sCMOS cameras) and experience a crash upon starting Micro-Manager (or loading a hardware configuration), please upgrade to the 20150820 nightly build (Windows 64-bit, Windows 32-bit)
• Olympus IX83 users: please use 1.4.21 instead.

Changes in 1.4.22 (since 1.4.21)

Download Olympus Port Devices Driver

• Bugfixes and enhancements in the main application
  • Fix a hang when restarting MDA with data processors installed while Live mode is running (Mark Tsuchida)
  • When adding Z stage devices, the user may now specify the directionality of the stage (whether positive or negative directions move closer to the sample)
  • Fix a bug with storage of user configuration data on Windows 8 and later operating systems (Chris Weisiger)
  • Bugfixes relating to saved data:
    • Fix a minor bug in formatting of metadata in multipage TIFF files (Mark Tsuchida)
    • Fix a bug causing truncation of OME Medatada (Chris Weisiger)
    • Fix a memory leak noticeable when running acquisitions with large position lists (Chris Weisiger)
  • Display bugfixes:
    • Fix a bug causing RGB channels to be swapped when loading files (Chris Weisiger)
    • Fix display of total timepoints in cancelled acquisitions (Chris Weisiger)
  • Fix a bug in behavior of slider controls in European locales (Mark Tsuchida)
  • Fix a NullPointerException when the logfile directory is missing (Mark Tsuchida)
  • Fix a NullPointerException in the Metadata panel (Nico Stuurman)
  • Correctly remember autofocus parameters in preferences (Mark Tsuchida)
  • Enable high-resolution rendering on Macs with Retina Displays
  • Add setting for focus stage coordinate polarity in Hardware Configuration Wizard (Mark Tsuchida)
• New plugins
  • Mightex Polygon, for controlling the Polygon patterned illuminator devices
• Updated plugins
  • ASIdiSPIM: numerous bugfixes and improvements (Jon Daniels, Nico Stuurman)
  • Projector: numerous bugfixes and improvements (Jon Daniels, Nico Stuurman)
  • HCS Site Generator
    • Improved acquisition pathing within a well, using a snakelike route (Nico Stuurman)
    • add support for 6- and 12-well plates (Thomas Petebauer, Chris Weisiger)
• Autofocus plugins
  • Added NullAutofocus, an autofocus method that does nothing, useful in certain complex acquisitions (Mark Tsuchida)
• New device adapters
  • CNCMicroscope adapters (David Konerding)
    • ArduinoNeoPixel: Adafruit NeoPixel sheild as a shutter
    • RAMPS: RepRap RAMPS/Marlin motor drivers as XY and Z stage
  • Diskovery: Andor Diskovery multi-modal imaging system (Nico Stuurman)
  • Standa8SMC4: An alternative Standa stage adapter using the XIMC motion control library (Eugene Seliverstov)
• Updated device adapters
  • Andor: Update Andor DLLs; add iXon 888 isolated crop ROIs; support FVB mode; add hardware timestamps on compatible cameras; fix Exposure display (Matthew Milford, Andor)
  • AndorSDK3: Allow fast exposure switching for Snap; allow switching on/off static blemish correction; add shutter control properties (Matthew Milford and Francis McCloy, Andor)
  • AndorShamrock: Add Rayleigh wavelength property; other fixes (Francis McCloy, Andor)
  • ASITiger: Support SetOriginX/Y; updates to scanner and PLogic; hardware sequencing support for piezo (Jon Daniels, ASI)
  • Cobolt: Fix a serial communication issue (Mark Tsuchida)
  • GigECamera: Avoid an error while connecting with some cameras (Mark Tsuchida)
  • IIDC: Add limited/experimental color camera support (Mark Tsuchida)
  • LeicaDMI: Add fixed shutter delay setting (Egor Zindy); fix turret control issues with DMi8 (Mark Tsuchida)
  • Marzhauser: Fix potential serial communication issue (Falk Dettmar, Marzhauser)
  • Mightex_C_Cam: Updates (JT Zheng, Mightex)
  • NI100X (National Instruments): Add support for hardware-triggered sequencing (Chris Weisiger)
  • OpenCVgrabber: update from OpenCV 2.4.8 to 2.4.9 on OS X (Mark Tsuchida)
  • PCO_Camera: Fix issue when using software trigger mode with pco.camera (Franz Reitner, PCO)
  • PI: Fix serial connection issue with certain controllers (Mark Tsuchida)
  • PICAM: Allow use of multiple cameras (Mark Tsuchida)
  • PVCAM: Fix a crash when enabling Color during Live; fix a possible Snap failure after changing binning and ROI; prevent timeout with slow cameras (Photometrics)
  • Prior: Fix a communication issue with certain controllers (Mark Tsuchida)
  • Sapphire: Fix a serial communication issue (Mark Tsuchida)
  • SpectralLMM5: Add FLICR (PWM) and fiber output selection support (Nico Stuurman)
  • StandaStage: Disable limit switch setting causing issues with some setups (Ed Simmons)
  • SutterLambda: Add setting for filter wheel timeout (Nico Stuurman)
  • XIMEA: Fix crash upon Snap; use camera timestamp resetting only for applicable cameras; add missing GPO port modes for MU USB2 (Marian Zajko, XIMEA)
  • Yokogawa CSU22, CSUX, CSUW1: Fix a possible hang; speed no longer a state device (Pariksheet Nanda)
  • ZeissCAN: Fix problem while disconnecting when connected by USB (Nico Stuurman)
• New closed-source device adapters
  • MightexPolygon: Mightex Polygon multiwavelength patterned illuminators (Mightex)
• Updated closed-source device adapters
  • HamamatsuHam: Fix ROI coordinates when binning enabled (Nico Stuurman)
  • Olympus: Fix Focus Sensitivity setting (Mark Tsuchida)
  • OlympusIX83: Prevent reporting incorrect stage position immediately after move (Mark Tsuchida)
  • RaptorEPIX: Add support for OWL640, Ninox and Eagle cameras (David Biggs)
• Changes of interest to developers
  • Micro-Manager 1.4.22 is SVN trunk r15693, 3rdparty r176.
  • All but a few of the Java dependency JARs are now fetched from Maven repositories using Ivy, rather than using the copy in 3rdpartypublic/classext (Mark Tsuchida)
  • Add an unregisterForEvents() method to the gui (ScriptInterface) API (Henry Pinkard)
  • MMCore API changes
    • Add methods setOriginX(), setOriginY() for XY stages that allow zeroing X and Y independently (Mark Tsuchida)
    • The home() and stop() method now also work with Z/focus stages (where supported) (Mark Tsuchida)
    • Add methods setFocusDirection(), getFocusDirection(), allowing to store and retrieve focus stage coorinate polarity where known. Explicitly set values are recorded in hardware configuration file (Mark Tsuchida)
    • Add methods getGalvoXMinimum(), getGalvoYMinimum() (Nico Stuurman)
  • MMDevice interface changes
    • Add optional methods to set X and Y origin separately for XY stages (SetXOrigin() and SetYOrigin()) (Mark Tsuchida)
    • Add optional Home() and Stop() methods to Z/focus stages (Mark Tsuchida)
    • Add optional GetFocusDirection() to Z/focus stages (Mark Tsuchida)
    • Add GetXMinimum(), GetYMinimum() methods to galvo device (Nico Stuurman)
    • The HubID property is now read-only (Nico Stuurman)
• Miscellaneous
  • Added a MATLAB script, StartMMStudio.m that configures and starts MMStudio (Windows only) (Mark Tsuchida)

(Previous releases)

Download Olympus Port Devices Drivers

• August 22, 2019 2.9.8

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.8	Released August 22, 2019	Type ZIP	Filesize 3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added several internal interfaces for particular sensors (J003).

• January 25, 2019 2.9.6

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.6	Released January 25, 2019	Type ZIP	Filesize 3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added missing Tonemapping Auto property.

• May 4, 2018 2.9.5

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.5	Released May 4, 2018	Type ZIP	Filesize 3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 controller Graphics card with 24 or 32 bit Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Enabled tonemapping for 8bit video formats, e.g. Y800, RGB24 and RGB32.

• November 21, 2017 2.9.4

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.4	Released November 21, 2017	Type ZIP	Filesize 3.2MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Repaired not working J003 mono sensor pattern fix on particular video formats. This driver version is the last that works in Windows XP.

• January 9, 2017 2.9.3

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.3	Released January 9, 2017	Type ZIP	Filesize 3.2MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added a pattern fix for J003 mono sensors.

• January 9, 2017 2.9.1

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.9.1	Released January 9, 2017	Type ZIP	Filesize 3.2MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed the driver signature Code 52 error on new Windows 10 v1607 systems.

• January 15, 2016 2.8.9

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.8.9	Released January 15, 2016	Type ZIP	Filesize 2.3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Changed certificates so that the driver can also be installed in Vista.

• November 9, 2015 2.8.7

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.8.7	Released November 9, 2015	Type ZIP	Filesize 2.3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed an error which can appear when using sharpness on older CPUs.

• October 20, 2015 2.8.5

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.8.5	Released October 20, 2015	Type ZIP	Filesize 2.3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed a bug which can appear on LivePause call.

• July 15, 2015 2.8.0

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.8.0	Released July 15, 2015	Type ZIP	Filesize 2.4MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Support of DFK ECU010-L34 with serial number property. Added tone mapping.

• February 17, 2015 2.7.33

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.7.33	Released February 17, 2015	Type ZIP	Filesize 2.4MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog The Auto Focus Onepush Running flag now resets correctly after the auto focus has finished.

• February 5, 2015 2.7.32

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.7.32	Released February 5, 2015	Type Mainpage Find driver Season Events Top stats Photos History of cars Car plates Rally calendar. SS20 Schutte Informatisering (7.64 km) 3:32.0: 2. Class C7: 129.7. Unica Schutte ICT Hellendoorn Rally 2011. 2011. asphalt - gravel 157.36 km. Other years. Nederland #6. Nederland National #5. BMW 325i Challenge (NL) #4. Schutte informatisering driver. Service Team Whether remote or on-site service, Schutte offers the complete know-how for the entire machine life. Spare Parts / Machining Services 800-668-4035. ZIP	Filesize 2.4MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Video format MJPG (2592x1944) of DFK AFU050-L34 camera can now be used.

• January 14, 2015 2.7.31

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.7.31	Released January 14, 2015	Type ZIP	Filesize 2.3MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Support for IMX236 based cameras. Support for RGB64 color formats. Several performance improvements.

• June 6, 2014 2.7.9.1152

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.7.9.1152	Released June 6, 2014	Type ZIP	Filesize 2.1MB
  Requirements Intel Core i3 or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Added new properties: Brightness, sharpness, de-noise, saturation, hue and contrast. Added new property: Highlight reduction. Added new property: White balance temperature controls. Pixelfix for Y16 cameras now works as expected. VideoControl_ExternalTrigger (DirectShow property) can now be set as expected.

• January 1, 2014 2.6.5.1014

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Version 2.6.5.1014	Released January 1, 2014	Type ZIP	Filesize 1.9MB
  Requirements Intel Pentium IV or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit) DirectX 9.0c or higher
  Changelog Fixed missing auto-gain for DFK AFU130. Fixed focus when start value is out of auto_focus_range. Fixed problem with AUTOFOCUS_ROI_RIGHT: minimum possibly wrong. Fixed auto focus ROI not working for 21*UC cameras. Fixed crash on load/connect with certain cameras 22/72xUC. Fixed previous exposure settings not being loaded on reconnect. Complete reworking of internal property system. Fixed Windows XP driver load crash. Fixed drop counter to be accessible from DirectShow. Fixed Windows 8 problem with certain video formats needing converters with standard DirectShow filters (e.g. Y800, capturing to an Y800 avi file was not possible). Fixed a problem with Windows 8 usbxhci driver not allowing transfers larger then 4 MB.

• February 26, 2013 2.4.14.851

  Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.
  Drivers optika cameras. Version 2.4.14.851	Released February 26, 2013	Type ZIP	Filesize 1.9MB
  Requirements Intel Pentium IV or similar, 2 GB RAM USB 3.0 or USB 2.0 controller (depends upon camera model) Graphics card with 24 or 32 bit Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit) DirectX 9.0c or higher
  Changelog WHQL certification.